[Solved]Hiren's HMA not available XMS driver not found Failed to create RAM driver more than 2GB



Warning: the high memory area (HMA) is not available
Additional low memory (below 640K) will be used instead
Creating 64mb ram driver as R:
XMS driver not found
Failed to create ram driver (more than 2RAM?
Restart and try {next…] [Dos…] [Dos Settings] Himemx

Download Hard Disk Re-generator Bootable CD ISO with HMA Himem driver

Resolution 1
This occurs when the device driver HIMEM.SYS is being loaded but does not have a machine handler chosen. The Hirens Boot CD accounts for this and has a work around built in for it. The steps below detail how to work around this error:
Boot into Hirens Boot CD
Select Dos Programs
Select NextDos
Select Dos Settings
Select Dos with HIMEN.SYS /M:1
Click default buttons to messages displayed
Once this finishes you are presented with R:(may not be the same drive letter)
Enter M and hit enter
This will then launch a new menu
Select Backup tools from here and run ghost

Resolution 2
This error occurred as the Ghost image has been created on a XP machine with an IDE drive. The machine being re-imaged had a SATA drive. Once you have completed the re-imaging you will need to make a change in the BIOS. The steps below detail how to do this:
Reboot and hit F10 to take you to the BIOS
Select Storage
Select Storage Options
Select SATA Emulation
Change this to IDE mode
Reboot and it will successful boot into XP

Source:

I’ve found a 3. (third) solution.
Some new laptop/notbook has NO option to chose IDE mode instead of SATA. (2. (second) out)
I’ve tried the 1. method.
I’ve selected Dos with HIMEN.SYS /M:1 the RAM drive created but the DOS programs (for example GHOST) ain’t run, but I found a solution !

Solution 3 (if the 1-2 not works)
The steps below detail how to work around this error:
Boot into Hirens Boot CD
Select Dos Programs
Select NextDos
Select Dos Settings
Select Dos (with HimemX,try this if Ram Drive fails)
Iv’ got R:(may not be the same drive letter)
Enter M and hit enter
This will then launch a new menu Select Backup tools from here and run ghost and It will WORK.

Nguồn:https://dantrionline.com.vn/


https://danhnhan.vn/cong-nghe

Article Tags:
Article Categories:
Công Nghệ

Comments

  • you are idiot go to any ** tab 100 times , and can not see what press 😫😤😤😤😤

    fratelo 98 February 29, 2020 10:48 pm Reply
  • Very very thanku so much I will subscribe u just

    THE SINGLA Technologies February 29, 2020 10:48 pm Reply
  • It works for me, thank you

    gokuley February 29, 2020 10:48 pm Reply
  • tks

    Leonardo Nabarro February 29, 2020 10:48 pm Reply
  • Thanks

    Sergei Chetverik February 29, 2020 10:48 pm Reply
  • amigo que haces para para que salga la ventana Partition list donde aparece la los discos duros y que se selecciona para qe salga la ventana negra que dice como titulo Program MUST NOT be run from a partiton……

    GRICERIO RUIZ February 29, 2020 10:48 pm Reply
  • amigo una consulta cuando me sale la ventana azul de Randish Partition Manager, en la Linea O MBR Master Boot Record que tecla oprimo xque es rapido no se cual, por favor sea tan amable

    GRICERIO RUIZ February 29, 2020 10:48 pm Reply
  • Muito obrigado!

    Marcio Henrique February 29, 2020 10:48 pm Reply
  • Muchas gracias.

    ramon eduardo tellez carvajal February 29, 2020 10:48 pm Reply
  • Great !!! thankyou !!! I learned something new, and i really need it !!

    MrTristeando February 29, 2020 10:48 pm Reply
  • Hello,
    First thank you there's not a lot of advice concerning this issue.
    "
    I have a question : How do you allocate more ram to HBCD with the ghost or any tool that can be launched from "Dos with Himen.Sys"?

    Marius Rousseau February 29, 2020 10:48 pm Reply
  • Thanks

    Rodrigo Molina Nunes February 29, 2020 10:48 pm Reply
  • Thanks man… you just saved my life… 🙂

    Ahmer ghausi February 29, 2020 10:48 pm Reply
  • a mi me funciono norton ghost con la la opcion 2. DOS (whit himenX, try this if ram drive fails).
    gracias por el video

    capitan moran February 29, 2020 10:48 pm Reply
  • Thank you!!!

    Amy Sharo February 29, 2020 10:48 pm Reply
  • I learned something new.  Thanks

    Up & Running PC's February 29, 2020 10:48 pm Reply
  • Very usefull thanks

    neilmas February 29, 2020 10:48 pm Reply
  • I've found a 3. (third) solution.

    Some new laptop/notbook has NO option to chose IDE mode instead of SATA. (2. (second) out)

    I've tried the 1. method.  
    I've selected   Dos with HIMEN.SYS /M:1
    the RAM drive created but the DOS programs (for example GHOST) ain't run, 
    but I found a solution !
      
    Solution 3 (if the 1-2 not works)
    The steps below detail how to work around this error:
    Boot into Hirens Boot CD
    Select Dos Programs
    Select NextDos
    Select Dos Settings
    Select Dos (with HimemX,try this if Ram Drive fails)
    Iv' got R:(may not be the same drive letter)
    Enter M and hit enter
    This will then launch a new menu
    Select Backup tools from here and run ghost
    and It will WORK.

    A.G. Christmas February 29, 2020 10:48 pm Reply
  • Funciona Perfectamente, gracias. Tenia un lenovo ideapadflex 14 que no me funcionaba las opciones del hirens, y con esto pude rescatar la info.

    Gustavo Roman February 29, 2020 10:48 pm Reply
  • Спасибо большое.

    kubicrubica February 29, 2020 10:48 pm Reply
  • Hi Adel,

    I tried your solutions to go in to Ghost, but it did work in my laptop.

    So it's a fault from the CD Driver or where else? I don't know much about computer 🙁

    Nam Ng February 29, 2020 10:48 pm Reply
  • Resolution 1
    This occurs when the device driver HIMEM.SYS is being loaded but does not have a machine handler chosen. The Hirens Boot CD accounts for this and has a work around built in for it. The steps below detail how to work around this error:
    Boot into Hirens Boot CD
    Select Dos Programs
    Select NextDos
    Select Dos Settings
    Select Dos with HIMEN.SYS /M:1
    Click default buttons to messages displayed
    Once this finishes you are presented with R:>(may not be the same drive letter)
    Enter M and hit enter
    This will then launch a new menu
    Select Backup tools from here and run ghost

    Resolution 2
    This error occurred as the Ghost image has been created on a XP machine with an IDE drive. The machine being re-imaged had a SATA drive. Once you have completed the re-imaging you will need to make a change in the BIOS. The steps below detail how to do this:
    Reboot and hit F10 to take you to the BIOS
    Select Storage
    Select Storage Options
    Select SATA Emulation
    Change this to IDE mode
    Reboot and it will successful boot into XP

    Source: http://www.sadikhov.com/forum/index.php?/topic/187292-some-problem-with-usb-boot/

    kimzi minix February 29, 2020 10:48 pm Reply
  • Thank you very much

    Mr. Emil February 29, 2020 10:48 pm Reply
  • Hi, at the step choosing "Ranish Partition Magnager"  I don't know how to do the next step. tried to press ESC go back but it not correct. can you show me???

    na le February 29, 2020 10:48 pm Reply
  • thanks m8…u the best

    Erwind Johnny February 29, 2020 10:48 pm Reply
  • thanks 

    Nam Pham February 29, 2020 10:48 pm Reply
  • OMG thank you so much!

    Quang Phan February 29, 2020 10:48 pm Reply
  • Thanks, very helpful!

    Phuong On February 29, 2020 10:48 pm Reply
  • Dear Sir, Can you show clear more than? because i cannot see clearly after pressing M…

    Nguyen Hoang Quoc Minh February 29, 2020 10:48 pm Reply
  • m8 thanks
    you are a genious 😀

    Nino Kom February 29, 2020 10:48 pm Reply
  • when i press "M" for searching menu, in Hard Disk Tools tab, i didn't saw HDD Regenerator….(i need for finding bad sector). Can't you help me load HDD Regenerator ) ..please !

    KingMax Le February 29, 2020 10:48 pm Reply
  • Nice video !!
    Thank you !

    Mathieu Durin February 29, 2020 10:48 pm Reply
  • well done bro

    Mustapha Tahiri February 29, 2020 10:48 pm Reply
  • thx for help…

    David Goncalves February 29, 2020 10:48 pm Reply

Leave a Reply

Your email address will not be published. Required fields are marked *